PCB板上不同屏蔽方式对屏蔽效能的影响
摘要 为了验证PCB板上几种屏蔽方式对电磁脉冲干扰的抑制作用,在理论分析电路板屏蔽罩屏蔽效能的基础上,利用传输线解析计算方法对其抑制效果进行仿真计算。通过在敏感器件下面添加一个接地平面、在敏感器件上面放置一个屏蔽罩以及在屏蔽罩与接地平面之间增加接地柱等方式,比较不同隔离形式的屏蔽效能。分析结果表明:屏蔽罩的屏蔽效能远大于在接地平面的屏蔽效能,并且屏蔽罩的接地柱越多屏蔽效能越高。
关键词 电磁脉冲;屏蔽罩;屏蔽效能;传输线
Abstract To validate the different shielding mode influence on the shielding
effectiveness, the article analyzes the shielding effectiveness of shielding enclosure on
PCB theoretically, and computes the shielding effectiveness by transmission line matrix.
Comparing the shielding effectiveness by adding earth-plate under electronic
component, mounting shielding cover over electronic components, adding earth poles
between shielding cover and earth-plate, the result shows that the shielding
effectiveness of the shielding cover is bigger than that adding earth-plate under
electronic component, and the more earth poles are put, the better shielding
effectiveness is acquired.
Keywords EMP;shielding enclosure; shielding effectiveness; transmission line
本期目录
- 一种新的ESD扰度衡量方法
- 手机射频场感应骚扰抗扰度测试中...
- NU-FDTD在腔体孔缝电磁耦...
- 电源端子传导骚扰试验的测量不确...
- 出口插头插座产品型式试验常见问...
- GB/T 17626...
- 雷电在电信和信令网中引起的预期...
- GB 4706.1—...
- 传导骚扰抗扰度耦合/去耦网络的...
- 使用梳状信号发生器测量机箱的屏...
-
墨西哥NOM认证
N... - NEBS认证——电快速脉冲群 ...
- PCB板上不同屏蔽方式对屏蔽效...
- 房间电加热器浪涌抗扰度案例分析...
- 吸波材料在手机辐射防护中的作用...
- 雷达吸波材料的涂层结构设计 ...
-
电缆与连接器(九)
... - 2008 IEEE&...
- 关于IEC 6073...