来源:
《安全与电磁兼容》2013年第5期
作者:王鹏 朱崇铭 张梅
电压监测仪的静电放电抗扰度不合格整改
Rectification of Voltage Monitor for Electrostatic Discharge Immunity
Test
摘要 电压监测仪的静电放电抗扰度试验结果不合格,通过分析试验中出现的液晶屏没有显示和黑屏等现象,采取了增加滤波电容、减小耦合面积等整改措施,整改后电压监测仪通过了静电放电抗扰度试验。
关键词 电压监测仪;静电放电;耦合路径;整改
Abstract The result of electrostatic discharge immunity test on voltage monitor was
failed. Through the analysis of the test of the unqualified phenomenon such as black
screen, and by checking coupling path, some methods of improvement were carried
out such as increasing the filtering capacitor, and reducing the coupling area. Finally,
the voltage monitor passed electrostatic discharge immunity test.
Keywords voltage monitor;electrostatic discharge;coupling path;rectification
本期目录
- 快热式电热水龙头安全与发展趋势...
- 2013 IEEE&...
- 铁氧体磁性器件对开关电源干扰的...
- 电源EMI滤波器的选用原则及安...
- 反射式低通EMI滤波器工程制造...
- GB 4706.10...
- ETSI EN&nb...
-
球压试验难点解析
A... - MATLAB在PCB爬电距离测...
- IEC 60950-...
- 手机3C认证中的工厂检查风险识...
- FCC认证中5 GH...
- 电压监测仪的静电放电抗扰度不合...
- LED显示屏的电磁兼容设计 ...
- (Fe0.5
- 防护线对“单端-差分”微带线结...
- 电动车的电磁屏蔽仿真验证 <...
- 2013 IEEE&...
- 用基于FFT的EMI测试接收机...
- 上海梅赛德斯奔驰车辆技术有限公...